A Complete Guide to S60 Transmission Shift Flares, Slipping or Missing Gears

Thursday, May 29, 2014

To avoid the information getting lost, I copied this guide from: http://volvoforums.com/forum/volvo-s60-10/complete-guide-s60-transmission-shift-flares-slipping-missing-gears-59684/


What is this?
This is an attempt at producing a complete, thorough guide to solving automatic transmission shifting problems on Volvo S60s, 2002-2009. It is intended to be a complete primer for anyone who only knows that problems exist and very little else. It is basically a compilation/summary of a large amount of knowledge dispersed online.

I hope people of all experience levels will find this useful. I broke it up into sections to allow you to quickly scan through the information. What you will find below was gained through this forum, other websites, notably ipdusa.com (an online Volvo parts dealer), and my own experience with a 2002 S60 T5 with 125,000 miles. 

I have very limited automotive knowledge, and I apologize in advance if I have misinterpreted or wrongly assumed anything.


Contents
1.0 The Problem
1.1 Shift Flares
2.0 Solution
2.1 Updated B4 Servo Cover
2.2 Transmission Flush
2.2.1 Function of Transmission Fluid
2.2.2 Problems with ATF
2.2.3 Assessing the Quality of ATF
2.2.4 Type of ATF to Use
2.3 Software Update
3.0 Procedure
3.1 Replacing the B4 Servo Cover
3.2 Performing the Transmission Flush
3.3 Performing the Software Update
3.3.1 TCM Update
3.3.2 Adaptation
3.3.3 Reset Oil Counter
4.0 Results and Conclusion
4.1 Thank You
4.2 Responses Welcome
5.0 Resources
5.1 Websites
5.2 Volvo Forums
1.0 The Problem
The common problems on the transmissions in the early year models seems to be "shift flares" and sometimes generally hard shifting. These happen when the transmission "misses" a shift or "slips" between gears. Most of the time shift flares occur when shifting between gears 2 and 3. 

The transmission in my T5 is an Aisin Warner AW55-50/51SN. It's the Volvo-branded "Geartronic" transmission.
1.1 Shift Flares
A shift flare occurs when the transmission shifts from one gear to another (usually between gears 2 to 3). Instead of shifting smoothly and seamlessly, the transmission is goes into "neutral" with no gear engaged. After a few seconds of delay, the next gear engages. This can be a frightening situation when unexpected. Your foot stays on the accelerator as you expect a smooth transition between gears. When a shift flare occurs, the engine revs high, since the car is essentially in neutral, so that once the next gear finally engages, it slams into gear hard, shuddering the car. This is apparently where most of the physical damage is likely to occur to the transmission. Shift flares occur randomly, although you may find some correlation between flaring and other events, or environmental factors such as temperature. In my personal experience, I noticed much more pronounced flares after going through a lot of stop-and-go traffic, when the lower gears are shifting up and down a lot.

2.0 Solution

There are three primary services you can perform to remedy these problems short of rebuilding or replacing the transmission altogether. They are substantially cheaper than a rebuild or replacement and are the main focus here, though you should take note of these solutions to prevent problems even if you haven't experienced any yet. In fact, prevention of these problems is ideal since it means there is likely no physical damage, which cannot be reversed by this process.

The three services are listed below. I consider them a "three-legged stool" with each one just as important as the others. They are listed in the order I performed them, but there isn't necessarily a specific order that needs to be followed. Ideally, they should be done around the same time.
  • Install updated B4 Servo Cover.
  • Perform a transmission flush or drain-and-fill.
  • Have the transmission software updated.
2.1 Updated B4 Servo Cover
In my personal experience, this is the single-most effective remedy to solving the shift flare problems. This section is somewhat limited as I lack a full understand of how the B4 servo cover works from a technical standpoint.
The B4 servo cover is literally a round piece of metal that is a cover for the B4 piston mechanism. A B4 servo cover is on automatic transmissions in 2001-2009 S60s. The problem lies in the design of the B4 servo cover. Early transmissions, like the Aisin Warner AW55-50/51SN in my 2002 S60 T5, apparently have the most problems. Generally, the later the year model, the less flawed the design of the B4 servo cover is likely to be. After problems started cropping up, Volvo learned, and they started redesigning the B4 servo cover. According to ipdusa.com, Volvo changed the design of the cover multiple times, presumably before coming to the optimal design. So, even if you don't have the oldest and presumably most flawed B4 servo cover, it still may not be the latest and greatest.ipdusa.com states that "the latest design is stock on later models" but doesn't specify which models exactly, later stating that 2004 and newer models "usually" aren't affected.

To the non-technical eye, there are only minor visible differences between an old B4 servo cover and the new one, and it can be hard to believe these changes would make any difference in the mechanical function of the transmission. However, I believe the cover has something to do with the hydrostatic pressure of the fluid inside the transmission that affects the shifting behavior. The ipdusa.com description of this product states, "It's ironic how this inexpensive part can save someone from a costly transmission replacement."
2.2 Transmission Flush
A transmission flush involves replacing all the old fluid in the transmission with new fluid. There are two types of transmission flushes. One I have read about online involves dropping the fluid pan--a real flush.

The other a drain-and-fill, the one I performed, is much simpler but less thorough. However, a drain-and-fill may be preferable to a full flush on transmissions that have been severely neglected. A flush can knock loose particles that damage moving parts when they circulate around with the fluid (according to IPD). A drain-and-fill is less likely to disturb those particles.

I have also read suggestions to install a magnetic filter in the transmission fluid line to capture metal particles from the fluid after doing a drain-and-fill. This sounds like a good idea, but I didn't do it.
2.2.1 Function of Transmission Fluid
Again, I lack deep technical knowledge of the inner workings of transmissions so I will only provide a simple explanation here. Automatic transmissionfluid (ATF) is a hydraulic fluid, meaning it is under pressure. It is also a lubricant which minimizes friction and wear on the moving parts within the transmission. 
2.2.2 Problems with ATF
For a variety of reasons the fluid degrades. As the fluid quality degrades, it becomes less and less effective at meeting the performance standards the transmission is designed for. Also, even with the fluid acting as a friction reducer, the moving parts inside the transmission wear on each other to a limited extent. Over time, small metal filings end up in the fluid and help to wear the parts even more quickly. Thus, it is essential to flush the ATF at regular intervals to prolong the life of the transmission. 
A major cause of ATF not being changed is that Volvo didn't (and may still not) recognize that the fluid needs to be changed, *ever*. Volvo owners manuals state that the fluid is lifetime. This has obviously not turned out to be the case. The dealer I went to for the software update, said they *do* recommend a flush every 50,000 miles.
2.2.3 Assessing the Quality of ATF
The quality can be roughly determined by checking the color and the smell of the fluid. The transmissions we are discussing use fluid that must meet JWS 3309 specification (see the next section). Fresh, new ATF has the color and viscosity of red cough syrup and has a slightly sweet smell. Essentially, the further your ATF varies from these properties, the worse its condition. For example, when I flushed mine, the old ATF was black (like soy sauce) and had an offensive, slightly burnt smell. Basically, it was on the opposite end of the scale from new ATF.
2.2.4 Type of ATF to Use
The fluid to use must meet the JWS 3309 specification. I ordered Mobil ATF 3309 from AV Lubricants (Petroliance) (Petroliance DBA AV Lubricants-Your ExxonMobil Oil Distributor!). The Mobil product is not the cheapest option (You can expect to pay about $7-$8 per quart, and you will need 12-14 quarts.). I have read about other people using a Toyota-branded ATF called T-IV that is the same thing as the Mobil and apparently quite a bit cheaper. There is also a Volvo branded ATF. It's the same stuff. Those are the primary options, not the only ones. Whatever you decide to use, just make use it meets the JWS 3309 specification.
2.3 Software Update

Another cause of the problems is related to the TCM (transmission control module), the computer that controls the transmission. Like the B4 servo cover, the software has undergone numerous changes.

The update is usually best done at a Volvo dealer since it requires the expensive Volvo VADIS system. There are probably good indie shops that can do the update as well. With the B4 servo cover update, IPD strongly recommends a software update. I also strongly recommend getting the TCM update. From my experience, it does make a big difference.

The shop can also do an adaptation procedure that makes the TCM to "relearn" how to shift and adapt to your driving style. It essentially involves clearing the stored adaptation memory and forcing the TCM to accumulate new data.

Lastly, they can also reset the ATF oil counter. I don't know what that does. It probably just lets the TCM know how old the fluid is.
3.0 Procedure
This section will focus on the "how-to". I won't provide step-by-step instructions for every procedure, but I will identify where you can find such instructions and add additional comments and tips based on my personal experience.

A friend with non-model/make-specific knowledge of vehicles and I, with very limited automotive knowledge, were able to replace the B4 servo cover and flush the transmission in about 6 hours total. We would have finished quite a bit sooner if we had known a few small tricks. You may choose to have this work done by a mechanic or the Volvo dealer. My hopes are that by passing on this knowledge you will feel more confident in doing these procedures and be able to do them more easily yourself. Especially if your budget is limited, doing the work yourself is very cost-effective. In total, I spent about $170 to change the B4 servo cover and flush the transmission.
3.1 Replacing the B4 Servo Cover
The B4 servo cover is a round metal cover located on the transmission housing. It is accessed by removing the driver side wheel. I ordered the new B4 servo cover kit from ipdusa.com for around $21. The parts came in a Volvo-branded box and came with well-explained instructions from IPD. The same instructions are available as PDFs on their website under the product description, so even if you don't buy the parts from IPD, you can still use their instructions. However, I will say that I was very pleased with IPD. They also provided a bolt that is essential for doing the work.

First, be prepared to and have the basic tools for removing a tire. Next, you'll need a special tool called a snap-ring pliers. I bought a cheapo $4 pair with interchangeable heads, and they worked fine. Simply follow the IPD instructions carefully, and you shouldn't have any problems.

However, one important note that the IPD instructions are missing is to remove the large plastic underbody cover underneath the engine. It is attached with 6 bolts and comes off easily. This may be obvious to more seasoned DIYers, but we struggled for more than an hour until we took the underbody cover off. Taking the cover off gave us better access to the work area, but most importantly, it allowed us to use a long pry bar to gain more leverage when installing the new B4 servo cover. Before we removed the cover, we struggled unsuccessfully to depress the new B4 servo cover using a regular-sized screwdriver (It was all that would fit with the underbody cover in place.).

After you get it installed, the last step of the instructions have you basically drive around to let the car "relearn" how to shift under the new conditions. Immediately I noticed a huge difference. Shift flares were eliminated and shifting was less harsh in general. The instructions said to expect a few driving cycles for the transmission to learn, but I didn't notice any "learning curve." However, a few days later, problems started cropping up again but much less significantly. 
3.2 Performing the Transmission Flush
I bought the flush kit from ipdusa.com. Using this kit doesn't perform a true flush, it's really a drain-and-fill. IPD provides good instructions instructions with the kit. People on this site have pointed out that it's way overpriced for what you get: a hose and a replacement o-rings and clip. That said, if you're new to this, like I am, I would suggest getting the kit so you know you have exactly what you need. It comes with a green plastic clip and a metal one. For the 2001-onwards S60s, you'll need the green plastic clip and have a extra o-ring. The metal clip is for older models. The instructions don't make that clear. Take note of how everything is put together when you take it apart and you won't have any problems.

The IPD flush kit costs about $23.

You will also need to purchase 12-14 quarts of ATF meeting the JWS 3309 specification. The 12 quarts of Mobil ATF was $87 from AV Lubrications. See section 2.2.4 above. I also ordered an additional 2 quarts from IPD--for good measure.
3.3 Performing the Software Update
The last and easiest step. Take the vehicle to a Volvo dealer service shop or a good indie shop and ask to have the TCM (transmission control module) software updated. It is separate from the normal software updates, which dealers usually perform automatically with regular maintenance. You have to ask (and pay) for the TCM update. I explained what I work I had done, and this is the service they recommended and did. The car stayed at the dealer 2 days, which wasn't bad because they provided a loaner car for free. The total cost was around $150 for the software work.
3.3.1 TCM Update
First, the dealer checked for a TCM (transmission control module) update, which it needed. They also checked for any "death codes" that might indicate the transmission was about to die imminently. Thank goodness that wasn't the case. I was told I would be better off putting my money into a replacement than the software update if they got the death code.
3.3.2 Adaptation
They also reset the adaptation memory. I have read different things about this procedure, and I don't know exactly what they did at the dealer. However, when I got it back, the service guy told me to drive it normally and that the TCM would adapt over the next 15 or so "key cycles." He said they cleared the adaptation memory and that the TCM would need to re-accumulate transmission data.

I specifically asked how I should be driving during the adaptation since I've read that you have to drive it slowly. The service guy said if you drive like a grandma, drive like a grandma, if you punch it at every intersection, punch it at every intersection. He explained that this is how the TCM adapts to your particular driving habits. During that time, I tried to do get a good cross-section of my usual driving habits, from fairly aggressive street driving to fast freeway driving to painfully slow creeping in rush-hour freeway traffic.
3.3.3 Reset Oil Counter
The third thing the dealer did was to reset the ATF oil counter since I told them I had changed drain-and-filled the transmission. I'm not exactly show what that does. It may let the computer know how old the fluid is. Nevertheless, it can't hurt.

4.0 Results and Conclusion

It's been 2 weeks since the B4 servo cover update and the drain-and-fill and 1 week since the software update on my 2002 S60 T5 with 125,000 miles. The overall improvement has been about 95% (100% being a complete reversal of all the symptoms). Since then, I have experienced 2-3 hard shifts (2 of those might have been "mini" shift flares). Each time, I was pushing it rather aggressively. The most common problem that occurs every 2-3 days is a delay when shifting from Park to Drive before actual engagement. If I avoid hitting the gas immediately after throwing in Drive, I've been able to avoid a harsh engagement.

After the first two steps, I saw about a 70% improvement, with some hard shifts, especially after heavy stop-and-go traffic, and fewer, shorter and much less intense flaring. The software update took car of the rest. I read that the TCM update adjusts the shift profile to be in the optimal part of the torque curve more often, for T5s especially (Drive Line - Howard's Volvo Maintenance), and after the update, I noticed the TCM tended to let the engine rev higher before shifting (around 2400 rpm, as Howard's Volvos says). 

While I don't consider this a permanent fix, I believe it will last me a year or two until I can afford to completely replace the transmission if I choose.

I highly recommend doing these procedures. You will almost definitely see an improvement. If the transmission has suffered physical damage as a result of flaring, there's nothing you can do to repair it short of a rebuild or replacement. The unknown variable in my situation was how much, if any, physical damage had been done. While I suspect it has been damaged some, it's at least drivable now.
4.1 Thank You
A special thanks to everyone on this website for all the great tips and suggestions. I would, in all likelihood, be getting an expensive transmission replacement right now, if I hadn't had this resource. I hope this post returns part of the favor. If you have a specific question or need clarification, please don't hesitate to post or contact me directly.

Also, thanks to the larger online Volvo community. It's great to now be a fellow Volvo owner, despite the headaches. 
4.2 Responses Welcome
I know I have most likely left out valuable information or made suggestions others would disagree with. I welcome comments. Please just be sure to note the section number in your response so others can cross-reference the information as easily as possible.

5.0 Resources


This list is by no means exhaustive.
5.1 Websites

AV Lubricants
. Distributor of Mobil ATF 3309. Based in OH.
Petroliance DBA AV Lubricants-Your ExxonMobil Oil Distributor!

Howard's Volvo Maintenance: Transmission Issues. Provides a lot of useful advice and solid explanations on the transmission issues discussed here.
Drive Line - Howard's Volvo Maintenance

ipd (ipdusa.com). A Volvo parts supplier based in Portland, OR. Good selection of aftermarket and OEM parts. Very helpful instructions provided with some parts. Good explanations in some product descriptions. Trustworthy and helpful.
Volvo Parts, Accessories and Performance Specialist Since 1963

ipd: Haynes Repair Manual.
Haynes Shop Manual - UK Edition

Wikipedia. "Geartronic." Background info.
Geartronic - Wikipedia, the free encyclopedia

Wikipedia. "List of Aisin transmissions." Background info.
List of Aisin transmissions - Wikipedia, the free encyclopedia
5.2 Volvo Forums

"S60 T5 transmission slipping." My original post on this issue.
S60 T5 transmission slipping
"01 S60 Transmission."
S60 T5 transmission slipping

"2001 S60 T5 Transmission ?."
2001 S60 T5 Transmission ?

"2001 S60 TRANSMISSION ADVICE."
2001 S60 TRANSMISSION ADVICE

"2001 S60 Transmission fluid change."
2001 S60 Transmission fluid change

Read more...

Life’s Little Instruction Book (30 pics)

Saturday, January 4, 2014

The instructions mentioned in this book are priceless!

Life’s Little Instruction Book (30 pics)

Read more...

Nothing is solid: This is the world of Quantum Physics.

Friday, December 27, 2013

Nothing is solid: This is the world of Quantum Physics.

Nobel Prize winning physicists have proven beyond doubt that the physical world is one large sea of energy that flashes into and out of being in milliseconds, over and over again.

Nothing is solid.

This is the world of Quantum Physics.

They have proven that thoughts are what put together and hold together this ever-changing energy field into the ‘objects’ that we see.

So why do we see a person instead of a flashing cluster of energy?

Think of a movie reel.

A movie is a collection of about 24 frames a second. Each frame is separated by a gap. However, because of the speed at which one frame replaces another, our eyes get cheated into thinking that we see a continuous and moving picture.

Think of television.

A TV tube is simply a tube with heaps of electrons hitting the screen in a certain way, creating the illusion of form and motion.

This is what all objects are anyway. You have 5 physical senses (sight, sound, touch, smell, and taste).
Each of these senses has a specific spectrum (for example, a dog hears a different range of sound than you do; a snake sees a different spectrum of light than you do; and so on).

In other words, your set of senses perceives the sea of energy from a certain limited standpoint and makes up an image from that.

It is not complete, nor is it accurate. It is just an interpretation.

All of our interpretations are solely based on the ‘internal map’ of reality that we have, and not the real truth. Our ‘map’ is a result of our personal life’s collective experiences.

Our thoughts are linked to this invisible energy and they determine what the energy forms. Your thoughts literally shift the universe on a particle-by-particle basis to create your physical life.

Look around you.

Everything you see in our physical world started as an idea, an idea that grew as it was shared and expressed, until it grew enough into a physical object through a  number of steps.

You literally become what you think about most.

Your life becomes what you have imagined and believed in most.

The world is literally your mirror, enabling you to experience in the physical plane what you hold as your truth … until you change it.

Quantum physics shows us that the world is not the hard and unchangeable thing it may appear to be. Instead, it is a very fluid place continuously built up using our individual and collective thoughts.

What we think is true is really an illusion, almost like a magic trick.

Fortunately we have begun to uncover the illusion and most importantly, how to change it.
What is your body made of?

Nine systems comprise the human body including Circulatory, Digestive, Endocrine, Muscular, Nervous, Reproductive, Respiratory, Skeletal, and Urinary.

What are those made up of?

Tissues and organs.

What are tissues and organs made of?

Cells.

What are cells made of?

Molecules.

What are molecules made of?

Atoms.

What are atoms made of?

Sub-atomic particles.

What are subatomic particles made of?

Energy!

You and I are pure energy-light in its most beautiful and intelligent configuration. Energy that is constantly changing beneath the surface and you control it all with your powerful mind.

You are one big stellar and powerful Human Being.

If you could see yourself under a powerful electron microscope and conduct other experiments on yourself, you would see that you are made up of a cluster of ever-changing energy in the form of electrons, neutrons, photons and so on.

So is everything else around you. Quantum physics tells us that it is the act of observing an object that causes it to be there where and how we observe it.

An object does not exist independently of its observer! So, as you can see, your observation, your attention to something, and your intention, literally creates that thing.

This is scientific and proven.

Your world is made of spirit, mind and body.

Each of those three, spirit, mind and body, has a function that is unique to it and not shared with the other. What you see with your eyes and experience with your body is the physical world, which we shall call Body. Body is an effect, created by a cause.

This cause is Thought.

Body cannot create. It can only experience and be experienced … that is its unique function.

Thought cannot experience … it can only make up, create and interpret. It needs a world of relativity (the physical world, Body) to experience itself.

Spirit is All That Is, that which gives Life to Thought and Body.

Body has no power to create, although it gives the illusion of power to do so. This illusion is the cause of much frustration. Body is purely an effect and has no power to cause or create.

The key with all of this information is how do you learn to see the universe differently than you do now so that you can manifest everything you truly desire.

Source: John Assaraf

Read more...

OBDII to Volvo Code Conversion List

For those that ever pull codes with a standard OBDII reader here's the conversion list for getting the Volvo DTC:

Column 1 = OBDII code
Column 2 = Volvo DTC code
Column 3 = Trouble code designation 
Column 4 = Fault type

P0016 -- ECM-670C -- Camshaft position, inlet -- High 
P0016 -- ECM-670D -- Camshaft position, inlet -- Low 
P0017 -- ECM-671C -- Camshaft position, exhaust -- High 
P0017 -- ECM-671D -- Camshaft position, exhaust -- Low 
P0026 -- ECM-6110 -- Camshaft control, inlet -- Slow 
P0026 -- ECM-611B -- Camshaft control, inlet -- Faulty 
P0027 -- ECM-6140 -- Camshaft control exhaust -- Slow 
P0027 -- ECM-614B -- Camshaft control exhaust -- Faulty 
P0030 -- ECM-244B -- Front heated oxygen sensor, bank 1 heating -- Signal missing 
P0031 -- ECM-244D -- Front heated oxygen sensor, bank 1 heating -- Signal too low 
P0032 -- ECM-244C -- Front heated oxygen sensor, bank 1 heating -- Signal too high 
P0036 -- ECM-223B -- Rear heated oxygen sensor, bank 1 -- Signal missing 
P0037 -- ECM-223D -- Rear heated oxygen sensor, bank 1 -- Signal too low 
P0038 -- ECM-223C -- Rear heated oxygen sensor, bank 1 -- Signal too high 
P0040 -- ECM-24A0 -- Front heated oxygen sensors mixed up -- Faulty signal 
P0041 -- ECM-2240 -- Rear heated oxygen sensors, mixed up -- Faulty signal 
P0050 -- ECM-254B -- Front heated oxygen sensor, bank 2 heating -- Signal missing 
P0051 -- ECM-254D -- Front heated oxygen sensor, bank 2 heating -- Signal too low 
P0052 -- ECM-254C -- Front heated oxygen sensor, bank 2 heating -- Signal too high 
P0053 -- ECM-2400 -- Front heated oxygen sensor, bank 1 heating -- Faulty signal 
P0053 -- ECM-240B -- Front heated oxygen sensor, bank 1 heating -- Signal missing 
P0053 -- ECM-240C -- Front heated oxygen sensor, bank 1 heating -- Signal too high 
P0053 -- ECM-240D -- Front heated oxygen sensor, bank 1 heating -- Signal too low 
P0056 -- ECM-233B -- Rear heated oxygen sensor, bank 2 -- Signal missing 
P0057 -- ECM-233D -- Rear heated oxygen sensor, bank 2 -- Signal too low 
P0058 -- ECM-233C -- Rear heated oxygen sensor, bank 2 -- Signal too high 
P0059 -- ECM-2500 -- Front heated oxygen sensor, bank 2 heating -- Faulty signal 
P0059 -- ECM-250B -- Front heated oxygen sensor, bank 2 heating -- Signal missing 
P0059 -- ECM-250C -- Front heated oxygen sensor, bank 2 heating -- Signal too high 
P0059 -- ECM-250D -- Front heated oxygen sensor, bank 2 heating -- Signal too low 
P0071 -- ECM-1410 -- Ambient temperature sensor -- Faulty signal 
P0071 -- ECM-141B -- Ambient temperature sensor -- Signal missing 
P0072 -- ECM-140D -- Ambient temperature sensor -- Signal too low 
P0073 -- ECM-140C -- Ambient temperature sensor -- Signal too high 
P0075 -- ECM-612B -- Intake camshaft reset valve -- Signal missing 
P0076 -- ECM-612D -- Intake camshaft reset valve -- Signal too low 
P0077 -- ECM-612C -- Intake camshaft reset valve -- Signal too high 
P0078 -- ECM-616B -- Exhaust camshaft reset valve -- Signal missing 
P0079 -- ECM-616D -- Exhaust camshaft reset valve -- Signal too low 
P0079 -- ECM-616D -- Exhaust camshaft reset valve -- Signal too low 
P0080 -- ECM-616C -- Exhaust camshaft reset valve -- Signal too high 
P0087 -- ECM-290D -- Fuel pressure -- Signal too low 
P0088 -- ECM-290C -- Fuel pressure -- Signal too high 
P0089 -- ECM-2900 -- Fuel pressure -- Faulty signal 
P0090 -- ECM-290B -- Fuel pressure -- Signal missing 
P0100 -- ECM-120C -- Air mass -- Signal too high 
P0100 -- ECM-120D -- Air mass -- Signal too low 
P0101 -- ECM-1210 -- Mass air flow sensor -- Flow too high 
P0101 -- ECM-121B -- Mass air flow sensor -- Flow too low 
P0102 -- ECM-121D -- Mass air flow sensor -- Signal too low 
P0103 -- ECM-121C -- Mass air flow sensor Signal too high 
P0110 -- ECM-132D -- Intake air temperature (IAT) sensor inlet -- Signal too low 
P0111 -- ECM-1320 -- Intake air temperature (IAT) sensor inlet -- Faulty signal 
P0111 -- ECM-132C -- Intake air temperature (IAT) sensor inlet -- Signal too high 
P0112 -- ECM-131C -- Intake air temperature (IAT) sensor inlet -- Signal too high 
P0113 -- ECM-131D -- Intake air temperature (IAT) sensor inlet -- Signal too low 
P0117 -- ECM-273C -- Engine coolant temperature (ECT) sensor -- Signal too high 
P0118 -- ECM-273D -- Engine coolant temperature (ECT) sensor -- Signal too low 
P0121 -- ECM-9210 -- Electronic throttle unit, potentiometer 1 -- Faulty signal 
P0122 -- ECM-921D -- Electronic throttle unit, potentiometer 1 -- Signal too low 
P0123 -- ECM-921C -- Electronic throttle unit, potentiometer 1 -- Signal too high 
P0125 -- ECM-270B -- Engine coolant temperature (ECT) sensor -- Signal missing 
P0128 -- ECM-2B00 -- Thermostat -- Faulty signal 
P0131 -- ECM-248D -- Front heated oxygen sensor, bank 1 -- Signal too low 
P0132 -- ECM-248C -- Front heated oxygen sensor, bank 1 -- Signal too high 
P0133 -- ECM-242D -- Front heated oxygen sensor, bank 1 -- Signal missing 
P0136 -- ECM-222B -- Rear heated oxygen sensor, bank 1 -- Signal missing 
P0137 -- ECM-222D -- Rear heated oxygen sensor, bank 1 -- Signal too low 
P0138 -- ECM-222C -- Rear heated oxygen sensor, bank 1 -- Signal too high 
P0140 -- ECM-221B -- Rear heated oxygen sensor aging, bank 1 -- Signal missing 
P0140 -- ECM-221C -- Rear heated oxygen sensor aging, bank 1 -- Signal too high 
P0140 -- ECM-221D -- Rear heated oxygen sensor aging, bank 1 -- Signal too low 
P0141 -- ECM-2200 -- Rear heated oxygen sensor bank 1, heating -- Faulty signal 
P0151 -- ECM-258D -- Front heated oxygen sensor, bank 2 -- Signal too low 
P0152 -- ECM-258C -- Front heated oxygen sensor, bank 2 -- Signal too high 
P0153 -- ECM-252D -- Front heated oxygen sensor, bank 2 -- Signal missing 
P0156 -- ECM-232B -- Rear heated oxygen sensor, bank 2 -- Signal missing 
P0157 -- ECM-232D -- Rear heated oxygen sensor, bank 2 -- Signal too low 
P0158 -- ECM-232C -- Rear heated oxygen sensor, bank 2 -- Signal too high 
P0160 -- ECM-231B -- Rear heated oxygen sensor aging, bank 2 -- Signal missing 
P0160 -- ECM-231C -- Rear heated oxygen sensor aging, bank 2 -- Signal too high 
P0160 -- ECM-231D -- Rear heated oxygen sensor aging, bank 2 -- Signal too low 
P0161 -- ECM-2300 -- Rear heated oxygen sensor bank 2, heating -- Faulty signal 
P0182 -- ECM-2A0D -- Fuel temperature sensor -- Signal too low 
P0183 -- ECM-2A0C -- Fuel temperature sensor -- Signal too high 
P0190 -- ECM-280B -- Fuel pressure sensor -- Signal too high 
P0191 -- ECM-2800 -- Fuel pressure sensor -- Signal too low 
P0192 -- ECM-280D -- Fuel pressure sensor -- Signal too low 
P0193 -- ECM-280C -- Fuel pressure sensor -- Signal too high 
P0197 -- ECM-540D -- Oil quality, level and temperature sensor -- Signal too low 
P0198 -- ECM-540C -- Oil quality, level and temperature sensor -- Signal too high 
P0199 -- ECM-540B -- Oil quality, level and temperature sensor -- Faulty signal 
P0201 -- ECM-2C0B -- Injector cyl 1 -- Signal missing 
P0202 -- ECM-2C1B -- Injector cyl 2 -- Signal missing 
P0203 -- ECM-2C2B -- Injector cyl 3 -- Signal missing 
P0204 -- ECM-2C3B -- Injector cyl 4 -- Signal missing 
P0205 -- ECM-2C4B -- Injector cyl 5 -- Signal missing 
P0206 -- ECM-2C5B -- Injector cyl 6 -- Signal missing 
P0221 -- ECM-9220 -- Electronic throttle unit, potentiometer 2 -- Faulty signal 
P0222 -- ECM-922D -- Electronic throttle unit, potentiometer 2 -- Signal too low 
P0223 -- ECM-922C -- Electronic throttle unit, potentiometer 2 -- Signal too high 
P0234 -- ECM-601C -- Turbo control defective boost pressure -- Signal too high 
P0237 -- ECM-125D -- Charge pressure sensor -- Signal too low 
P0238 -- ECM-125C -- Charge pressure sensor -- Signal too low 
P0240 -- ECM-1260 -- Charge pressure sensor -- Faulty signal 
P0240 -- ECM-126B -- Charge pressure sensor -- Signal missing 
P0240 -- ECM-126C -- Charge pressure sensor -- Signal too high 
P0240 -- ECM-126D -- Charge pressure sensor -- Signal too low 
P0243 -- ECM-600B -- Turbocharger (TC) control valve -- Signal missing 
P0245 -- ECM-600D -- Turbocharger (TC) control valve -- Signal too low 
P0246 -- ECM-600C -- Turbocharger (TC) control valve -- Signal too high 
P0261 -- ECM-2C0D -- Injector cyl 1 -- Signal too low 
P0262 -- ECM-2C0C -- Injector cyl 1 -- Signal too high 
P0264 -- ECM-2C1D -- Injector cyl 2 -- Signal too low 
P0265 -- ECM-2C1C -- Injector cyl 2 -- Signal too high 
P0267 -- ECM-2C2D -- Injector cyl 3 -- Signal too low 
P0268 -- ECM-2C2C -- Injector cyl 3 -- Signal too high 
P0270 -- ECM-2C3D -- Injector cyl 4 -- Signal too low 
P0271 -- ECM-2C3C -- Injector cyl 4 -- Signal too high 
P0273 -- ECM-2C4D -- Injector cyl 5 -- Signal too low 
P0274 -- ECM-2C4C -- Injector cyl 5 -- Signal too high 
P0276 -- ECM-2C5D -- Injector cyl 6 -- Signal too low 
P0277 -- ECM-2C5C -- Injector cyl 6 -- Signal too high 
P0299 -- ECM-602D -- Turbo control defective flow -- Signal too low 
P0300 -- ECM-3100 -- Misfire, at least one cylinder -- Start-up 
P0300 -- ECM-310C -- Misfire, at least one cylinder -- Catalytic converter damage 
P0300 -- ECM-310D -- Misfire, at least one cylinder -- Emissions impact 
P0300 -- ECM-310D -- Misfire, at least one cylinder -- Emissions impact 
P0301 -- ECM-3210 -- Misfire cylinder 1, start-up -- Start-up 
P0301 -- ECM-321C -- Misfire cylinder 1, catalytic converter damage -- Catalytic converter damage 
P0301 -- ECM-321D -- Misfire cylinder 1, emissions impact -- Emissions impact 
P0302 -- ECM-3220 -- Misfire cylinder 2, start-up -- Start-up 
P0302 -- ECM-322C -- Misfire cylinder 2, catalytic converter damage -- Catalytic converter damage 
P0302 -- ECM-322D -- Misfire cylinder 2, emissions impact -- Emissions impact 
P0303 -- ECM-3230 -- Misfire cylinder 3, start-up -- Start-up 
P0303 -- ECM-323C -- Misfire cylinder 3, catalytic converter damage -- Catalytic converter damage 
P0303 -- ECM-323D -- Misfire cylinder 3, emissions impact -- Emissions impact 
P0304 -- ECM-3240 -- Misfire cylinder 4, start-up -- Start-up 
P0304 -- ECM-324C -- Misfire cylinder 4, catalytic converter damage -- Catalytic converter damage 
P0304 -- ECM-324D -- Misfire cylinder 4, emissions impact -- Emissions impact 
P0305 -- ECM-3250 -- Misfire cylinder 5, start-up -- Start-up 
P0305 -- ECM-325C -- Misfire cylinder 5, catalytic converter damage -- Catalytic converter damage 
P0305 -- ECM-325D -- Misfire cylinder 5, emissions impact -- Emissions impact 
P0306 -- ECM-3260 -- Misfire cylinder 6, start-up -- Start-up 
P0306 -- ECM-326C -- Misfire cylinder 6, catalytic converter damage -- Catalytic converter damage 
P0306 -- ECM-326D -- Misfire cylinder 6, emissions impact -- Emissions impact 
P0324 -- ECM-3000 -- Engine control module (ECM), Internal fault -- Faulty signal 
P0324 -- ECM-3010 -- Engine control module (ECM), Internal fault -- Faulty signal 
P0324 -- ECM-3020 -- Engine control module (ECM), Internal fault -- Faulty signal 
P0327 -- ECM-303D -- Knock sensor front -- Signal too low 
P0328 -- ECM-303C -- Knock sensor front -- Signal too high 
P0332 -- ECM-304D -- Knock sensor rear -- Signal too low 
P0333 -- ECM-304C -- Knock sensor rear -- Signal too high 
P0335 -- ECM-500B -- Engine speed (RPM) sensor signal -- Signal missing 
P0336 -- ECM-5000 -- Engine speed (RPM) sensor signal -- Faulty signal 
P0337 -- ECM-500D -- Engine speed (RPM) sensor signal -- Signal too low 
P0338 -- ECM-500C -- Engine speed (RPM) sensor signal -- Signal too high 
P0340 -- ECM-340B -- Camshaft position (CMP) sensor, intake -- Signal missing 
P0342 -- ECM-340D -- Camshaft position (CMP) sensor, intake -- Signal too low 
P0343 -- ECM-340C -- Camshaft position (CMP) sensor, intake -- Signal too high 
P0344 -- ECM-3400 -- Camshaft position (CMP) sensor, intake -- Faulty signal 
P0345 -- ECM-341B -- Camshaft position (CMP) sensor, exhaust -- Signal missing 
P0347 -- ECM-341D -- Camshaft position (CMP) sensor, exhaust -- Signal too low 
P0348 -- ECM-341C -- Camshaft position (CMP) sensor, exhaust -- Signal too high 
P0349 -- ECM-3410 -- Camshaft position (CMP) sensor, exhaust -- Faulty signal 
P0351 -- ECM-360B -- Ignition coil cyl 1 -- Signal missing 
P0352 -- ECM-361B -- Ignition coil cyl 2 -- Signal missing 
P0353 -- ECM-362B -- Ignition coil cyl 3 -- Signal missing 
P0354 -- ECM-363B -- Ignition coil cyl 4 -- Signal missing 
P0355 -- ECM-364B -- Ignition coil cyl 5 -- Signal missing 
P0356 -- ECM-365B -- Ignition coil cyl 6 -- Signal missing 
P0420 -- ECM-400C -- Catalytic converter efficiency, bank 1 -- Signal too high 
P0430 -- ECM-401C -- Catalytic converter efficiency, bank 2 -- Signal too high 
P0442 -- ECM-439C -- Tank system, leakage -- Major leak 
P0443 -- ECM-421B -- Evaporative emission system (EVAP) valve -- Signal missing 
P0444 -- ECM-421C -- Evaporative emission system (EVAP) valve -- Signal too high 
P0445 -- ECM-421D -- Evaporative emission system (EVAP) valve -- Signal too low 
P0456 -- ECM-434C -- Tank system, leakage -- Minor leak 
P0457 -- ECM-430C -- Tank system, leakage -- Fuel tank cap missing 
P0457 -- ECM-4380 -- Tank cap -- Missing 
P0460 -- ECM-440C -- Fuel level sensor -- Signal too high 
P0461 -- ECM-4400 -- Fuel level sensor -- Faulty signal 
P0464 -- ECM-440B -- Fuel level sensor -- Signal missing 
P0480 -- ECM-650B -- Engine cooling fan (FC) -- Signal missing 
P0483 -- ECM-6200 -- Engine cooling fan (FC) control module -- Faulty signal 
P0484 -- ECM-620C -- Engine cooling fan (FC) control module -- Signal too high 
P0485 -- ECM-620D -- Engine cooling fan (FC) control module -- Signal too low 
P0496 -- ECM-420C -- EVAP-system -- Signal too high 
P0497 -- ECM-420D --EVAP-system -- Signal too high 
P0500 -- ECM-530C -- Speed signal -- Signal too high 
P0501 -- ECM-5300 -- Speed signal -- Faulty signal 
P0502 -- ECM-530D -- Speed signal -- Signal too low 
P0503 -- ECM-A12B -- Speed signal -- Signal missing 
P0503 -- ECM-A12C -- Speed signal -- Signal too high 
P0503 -- ECM-530B -- Speed signal -- Signal missing 
P0506 -- ECM-951D -- Engine control module (ECM), idle control -- Signal too low 
P0507 -- ECM-951C -- Engine control module (ECM), idle control -- Signal too high 
P0530 -- ECM-520B -- A/C pressure sensor -- Signal missing 
P0531 -- ECM-5200 -- A/C pressure sensor -- Faulty signal 
P0532 -- ECM-520D -- A/C pressure sensor -- Signal too low 
P0533 -- ECM-520C -- A/C pressure sensor -- Signal too high 
P0560 -- ECM-8200 -- Battery voltage -- Faulty signal 
P0561 -- ECM-800B -- System relay -- Signal too low 
P0562 -- ECM-820D -- Battery voltage -- Signal too low 
P0563 -- ECM-820C -- Battery voltage -- Signal too high 
P0564 -- ECM-930B -- Control module, communication fault -- Signal missing 
P0571 -- ECM-900B -- Brake pedal sensor -- Signal missing 
P0573 -- ECM-900C -- Brake pedal sensor -- Signal too low 
P0579 -- ECM-9300 -- Control module, communication fault -- Faulty signal 
P0580 -- ECM-930D -- Control module, communication fault -- Signal too low 
P0581 -- ECM-930C -- Control module, communication fault -- Signal too high

P0602 -- ECM-5110 --Malfunction indicator light CEM -- Faulty signal 
P0604 -- ECM-9970 -- Memory error RAM -- Faulty signal 
P0605 -- ECM-9980 -- Memory error ROM -- Faulty signal 
P0606 -- ECM-9990 -- Engine control module (ECM) -- Faulty signal 
P0607 -- ECM-9800 -- Engine control module (ECM), torque signal -- Internal fault 
P0607 -- ECM-9810 -- Engine control module (ECM), engine rpm -- Internal fault 
P0607 -- ECM-9820 -- Engine control module (ECM), load signal -- Internal fault 
P0607 -- ECM-983B -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-983C -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-983D -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-9840 -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-984B -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-9860 -- Engine control module (ECM) -- Internal fault 
P0607 -- ECM-720B -- Engine control module (ECM) internal fault -- Signal missing 
P0607 -- ECM-9850 -- Engine control module (ECM) -- Internal fault 
P0627 -- ECM-291B -- Fuel pump control module -- Signal missing 
P0628 -- ECM-291D -- Fuel pump control module -- Signal too low 
P0629 -- ECM-291C -- Fuel pump control module -- Signal too high 
P0634 -- ECM-7010 -- Engine control module high temperature -- Faulty signal 
P0634 -- ECM-7020 -- Engine control module high temperature -- Faulty signal 
P0638 -- ECM-9270 -- Throttle unit -- Faulty signal 
P0642 -- ECM-810D -- Power supply (5 volt) -- Signal too low 
P0643 -- ECM-810C -- Power supply (5 volt) -- Signal too high 
P0645 -- ECM-630B -- Air conditioning (A/C) relay -- Signal missing 
P0646 -- ECM-630D -- Air conditioning (A/C) relay -- Signal too low 
P0647 -- ECM-630C -- Air conditioning (A/C) relay -- Signal too high 
P0650 -- ECM-660B -- Malfunction indicator lamp (MIL) -- Signal missing 
P0650 -- ECM-660C -- Malfunction indicator lamp (MIL) -- Signal too high 
P0650 -- ECM-660D -- Malfunction indicator lamp (MIL) -- Signal too low 
P0668 -- ECM-700D -- Engine control module (ECM), Internal fault -- Signal too low 
P0669 -- ECM-700C -- Engine control module (ECM), Internal fault -- Signal too high
P0700 -- ECM-5100 -- Malfunction indicator light TCM -- Faulty signal 
P0700 -- ECM-5130 -- Malfunction indicator light TCM -- Faulty signal 
P0700 -- ECM-513B -- Malfunction indicator light TCM -- Signal missing 
P0727 -- ECM-330B -- Engine speed (RPM) sensor -- Faulty signal 
P0805 -- ECM-910B -- Clutch pedal sensor -- Signal missing 
P0806 -- ECM-9100 -- Clutch pedal sensor -- Faulty signal 
P0807 -- ECM-910D -- Clutch pedal sensor -- Signal too low 
P0808 -- ECM-910C -- Clutch pedal sensor -- Signal too high 
P0863 -- ECM-512B -- Malfunction indicator light communication -- Signal missing 
P1124 -- ECM-92B0 -- Throttle unit -- Faulty signal 
P1124 -- ECM-92D0 -- Throttle unit -- Faulty signal 
P1136 -- ECM-680B -- Cooling fan for control modules -- Signal missing 
P1136 -- ECM-680C -- Cooling fan for control modules -- Signal too high 
P1136 -- ECM-680D -- Cooling fan for control modules -- Signal too low 
P1167 -- ECM-92CC -- Throttle unit -- Signal too high 
P1167 -- ECM-92CD -- Throttle unit -- Signal too low 
P1480 -- ECM-620B -- Engine cooling fan (FC) control module -- Signal too low 
P1481 -- ECM-650D -- Engine cooling fan (FC) -- Signal too low 
P1482 -- ECM-650C -- Engine cooling fan (FC) -- Signal too high 
P1526 -- ECM-960C -- Engine control module (ECM), torque signal -- Internal fault 
P1646 -- ECM-2450 -- Front heated oxygen sensor, bank 1 -- Faulty signal 
P1646 -- ECM-245B -- Front heated oxygen sensor, bank 1 -- Signal missing 
P1646 -- ECM-245C -- Front heated oxygen sensor, bank 1 -- Signal too high 
P1646 -- ECM-245D -- Front heated oxygen sensor, bank 1 -- Signal too low 
P1647 -- ECM-2550 -- Front heated oxygen sensor, bank 2 -- Faulty signal 
P1647 -- ECM-255B -- Front heated oxygen sensor, bank 2 -- Signal missing 
P1647 -- ECM-255C -- Front heated oxygen sensor, bank 2 -- Signal too high 
P1647 -- ECM-255D -- Front heated oxygen sensor, bank 2 -- Signal too low 
P2065 -- ECM-440D -- Fuel level sensor -- Signal too low 
P2096 -- ECM-24BC -- Front heated oxygen sensor, bank 1 -- Signal too high 
P2097 -- ECM-24BD -- Front heated oxygen sensor, bank 1 -- Signal too low 
P2098 -- ECM-25BC -- Front heated oxygen sensor, bank 2 -- Signal too high 
P2099 -- ECM-25BD -- Front heated oxygen sensor, bank 2 -- Signal too low 
P2101 -- ECM-9240 -- Engine control module (ECM) -- Faulty signal 
P2108 -- ECM-929C -- Engine control module (ECM) -- Signal too high 
P2108 -- ECM-929D -- Engine control module (ECM) -- Signal too low 
P2108 -- ECM-9290 -- Engine control module (ECM) -- Faulty signal 
P2109 -- ECM-92E0 -- Engine control module (ECM) -- Internal fault
P2111 -- ECM-925C -- Throttle unit -- Signal too high 
P2111 -- ECM-925D -- Throttle unit -- Signal too low 
P2112 -- ECM-926C -- Throttle unit -- Signal too high 
P2112 -- ECM-926D -- Throttle unit -- Signal too low 
P2119 -- ECM-9280 -- Throttle unit -- Faulty signal 
P2121 -- ECM-9700 -- Accelerator pedal position sensor, digital signal -- Faulty signal 
P2121 -- ECM-970B -- Accelerator pedal position sensor, digital signal -- Signal missing 
P2122 -- ECM-941D -- Accelerator pedal position sensor, digital signal -- Signal too low 
P2123 -- ECM-941C -- Accelerator pedal position sensor, digital signal -- Signal too high 
P2126 -- ECM-9400 -- Accelerator pedal position sensor, analog signal -- Faulty signal 
P2127 -- ECM-940D -- Accelerator pedal position sensor, analog signal -- Signal too low 
P2128 -- ECM-940C -- Accelerator pedal position sensor, analog signal -- Signal too high 
P2131 -- ECM-9000 -- Brake pedal sensor -- Faulty signal 
P2135 -- ECM-9200 -- Throttle position sensor -- Faulty signal 
P2177 -- ECM-21EC -- Adaptive heated oxygen sensor control, bank 1 -- Signal too high 
P2177 -- ECM-212C -- Adaptive heated oxygen sensor control, bank 1 -- Signal too high 
P2178 -- ECM-21ED -- Adaptive heated oxygen sensor control, bank 1 -- Signal too low 
P2178 -- ECM-212D -- Adaptive heated oxygen sensor control, bank 1 -- Signal too low 
P2179 -- ECM-213C -- Adaptive heated oxygen sensor control, bank 2 -- Signal too high 
P2179 -- ECM-21FC -- Adaptive heated oxygen sensor control, bank 2 -- Signal too high 
P2180 -- ECM-213D -- Adaptive heated oxygen sensor control, bank 2 -- Signal too low 
P2180 -- ECM-21FD -- Adaptive heated oxygen sensor control, bank 2 -- Signal too low 
P2187 -- ECM-21EB -- Adaptive heated oxygen sensor control, bank 1 -- Signal missing 
P2187 -- ECM-216C -- Adaptive heated oxygen sensor control, bank 1 -- Signal too high 
P2188 -- ECM-21E0 -- Adaptive heated oxygen sensor control, bank 1 -- Faulty signal 
P2188 -- ECM-216D -- Adaptive heated oxygen sensor control, bank 1 -- Signal too low 
P2189 -- ECM-217C -- Adaptive heated oxygen sensor control, bank 2 -- Signal too high 
P2189 -- ECM-21FB -- Adaptive heated oxygen sensor control, bank 2 -- Signal missing 
P2190 -- ECM-217D -- Adaptive heated oxygen sensor control, bank 2 -- Signal too low 
P2190 -- ECM-21F0 -- Adaptive heated oxygen sensor control, bank 2 -- Faulty signal 
P2191 -- ECM-210C -- Adaptive heated oxygen sensor control, bank 1 -- Signal too high 
P2192 -- ECM-210D -- Adaptive heated oxygen sensor control, bank 1 -- Signal too low 
P2193 -- ECM-211C -- Adaptive heated oxygen sensor control, bank 2 -- Signal too high 
P2194 -- ECM-211D -- Adaptive heated oxygen sensor control, bank 2 -- Signal too low 
P2195 -- ECM-24B0 -- Front heated oxygen sensor, bank 1 -- Faulty signal 
P2196 -- ECM-24BB -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2197 -- ECM-25B0 -- Front heated oxygen sensor, bank 2 -- Faulty signal 
P2198 -- ECM-25BB -- Front heated oxygen sensor, bank 2 -- Signal missing 
P2227 -- ECM-1130 -- Atmospheric pressure sensor -- Faulty signal 
P2227 -- ECM-113B -- Atmospheric pressure sensor -- Signal missing 
P2227 -- ECM-113C -- Atmospheric pressure sensor -- Signal too high 
P2227 -- ECM-113D -- Atmospheric pressure sensor -- Signal too low 
P2228 -- ECM-112D -- Atmospheric pressure sensor -- Signal too low 
P2229 -- ECM-112C -- Atmospheric pressure sensor -- Signal too high 
P2231 -- ECM-243B -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2232 -- ECM-2220 -- Rear heated oxygen sensor, bank 1 -- Faulty signal 
P2234 -- ECM-253B -- Front heated oxygen sensor, bank 2 -- Signal missing 
P2235 -- ECM-2320 -- Rear heated oxygen sensor, bank 2 -- Faulty signal 
P2237 -- ECM-247B -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2238 -- ECM-2470 -- Front heated oxygen sensor, bank 1 -- Faulty signal 
P2239 -- ECM-247C -- Front heated oxygen sensor, bank 1 -- Signal too high 
P2240 -- ECM-257B -- Front heated oxygen sensor, bank 2 -- Signal missing 
P2241 -- ECM-2570 -- Front heated oxygen sensor, bank 2 -- Faulty signal 
P2242 -- ECM-257C -- Front heated oxygen sensor, bank 2 -- Signal too high 
P2243 -- ECM-249B -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2247 -- ECM-259B -- Front heated oxygen sensor, bank 2 -- Signal missing 
P2251 -- ECM-24AB -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2254 -- ECM-25AB -- Front heated oxygen sensor, bank 2 -- Signal missing 
P2281 -- ECM-640C -- Turbocharger (TC) control -- Signal too high 
P2281 -- ECM-640D -- Turbocharger (TC) control -- Signal too low 
P2300 -- ECM-360D -- Ignition coil cyl 1, signal -- Signal too low 
P2301 -- ECM-360C -- Ignition coil cyl 1, signal -- Signal too high 
P2303 -- ECM-361D -- Ignition coil cyl 2, signal -- Signal too low 
P2304 -- ECM-361C -- Ignition coil cyl 2, signal -- Signal too high 
P2306 -- ECM-362D -- Ignition coil cyl 3, signal -- Signal too low 
P2307 -- ECM-362C -- Ignition coil cyl 3, signal -- Signal too high 
P2309 -- ECM-363D -- Ignition coil cyl 4, signal -- Signal too low 
P2310 -- ECM-363C -- Ignition coil cyl 4, signal -- Signal too high 
P2312 -- ECM-364D -- Ignition coil cyl 5, signal -- Signal too low 
P2313 -- ECM-364C -- Ignition coil cyl 5, signal -- Signal too high 
P2315 -- ECM-365D -- Ignition coil cyl 6, signal -- Signal too low 
P2316 -- ECM-365C -- Ignition coil cyl 6, signal -- Signal too high 
P2400 -- ECM-433B -- Leakage diagnostic unit, pump -- Signal missing 
P2401 -- ECM-433D -- Leakage diagnostic unit, pump -- Signal too low 
P2402 -- ECM-433C -- Leakage diagnostic unit, pump -- Signal too high 
P2404 -- ECM-4360 -- Leak diagnostic unit -- Faulty signal 
P2405 -- ECM-436D -- Leak diagnostic unit -- Signal too low 
P2406 -- ECM-436C -- Leak diagnostic unit -- Signal too high 
P2407 -- ECM-436B -- Leak diagnostic unit - Signal missing 
P240A -- ECM-431B -- Leakage diagnostic unit, preheating -- Signal missing 
P240B -- ECM-431D -- Leakage diagnostic unit, preheating -- Signal too low 
P240C -- ECM-431C -- Leakage diagnostic unit, preheating -- Signal too high 
P2414 -- ECM-24C0 -- Front heated oxygen sensor, bank 1 -- Faulty signal 
P2415 -- ECM-25C0 -- Front heated oxygen sensor, bank 2 -- Faulty signal 
P2418 -- ECM-432B -- Leak diagnostic unit, valve -- Signal missing 
P2419 -- ECM-432D -- Leak diagnostic unit, valve -- Signal too low 
P2420 -- ECM-432C -- Leak diagnostic unit, valve -- Signal too high 
P250B -- ECM-5500 -- Oil level -- Faulty signal 
P250C -- ECM-550D -- Oil level -- Signal too low 
P2510 -- ECM-8210 -- System relay -- Faulty signal 
P2511 -- ECM-821B -- System relay -- Signal missing 
P2626 -- ECM-246B -- Front heated oxygen sensor, bank 1 -- Signal missing 
P2629 -- ECM-256B -- Front heated oxygen sensor, bank 2 -- Signal missing 
U0001 -- ECM-A130 -- Communication control module -- Signal missing 
U0002 -- ECM-E000 -- Communication control module -- Internal fault 
U0073 -- ECM-E003 -- Configuration error -- Faulty signal 
U0103 -- ECM-7300 -- Gear-shift position sensor -- Faulty signal 
U0167 -- ECM-710B -- Communication Immobilizer -- Signal missing 
U0401 -- ECM-A020 -- Configuration error -- Signal missing 
U0426 -- ECM-7100 -- Communication Immobilizer -- Faulty signal


source: http://forums.swedespeed.com/showthread.php?166473-OBDII-to-Volvo-Code-Converstion-List

Read more...

backlink

Free Automatic Backlink

Followers

  © Blogger template On The Road by Ourblogtemplates.com 2009

Back to TOP